module: remove never implemented MODULE_SUPPORTED_DEVICE

MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.

Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

Author: rleon

arch/x86/platform/iris/iris.c

@@ -27,7 +27,6 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Sébastien Hinderer <[email protected]>");
 MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille");
-MODULE_SUPPORTED_DEVICE("Eurobraille/Iris");
 
 static bool force;
 

drivers/atm/fore200e.c

@@ -100,8 +100,6 @@ static LIST_HEAD(fore200e_boards);
 
 MODULE_AUTHOR("Christophe Lizzi - credits to Uwe Dannowski and Heikki Vatiainen");
 MODULE_DESCRIPTION("FORE Systems 200E-series ATM driver - version " FORE200E_VERSION);
-MODULE_SUPPORTED_DEVICE("PCA-200E, SBA-200E");
-
 
 static const int fore200e_rx_buf_nbr[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ] = {
     { BUFFER_S1_NBR, BUFFER_L1_NBR },

drivers/block/floppy.c

@@ -5091,7 +5091,6 @@ module_param(floppy, charp, 0);
 module_param(FLOPPY_IRQ, int, 0);
 module_param(FLOPPY_DMA, int, 0);
 MODULE_AUTHOR("Alain L. Knaff");
-MODULE_SUPPORTED_DEVICE("fd");
 MODULE_LICENSE("GPL");
 
 /* This doesn't actually get used other than for module information */

drivers/bluetooth/btrsi.c

@@ -194,5 +194,4 @@ module_init(rsi_91x_bt_module_init);
 module_exit(rsi_91x_bt_module_exit);
 MODULE_AUTHOR("Redpine Signals Inc");
 MODULE_DESCRIPTION("RSI BT driver");
-MODULE_SUPPORTED_DEVICE("RSI-BT");
 MODULE_LICENSE("Dual BSD/GPL");

drivers/char/applicom.c

@@ -81,9 +81,6 @@ MODULE_DESCRIPTION("Driver for Applicom Profibus card");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_MISCDEV(AC_MINOR);
 
-MODULE_SUPPORTED_DEVICE("ac");
-
-
 static struct applicom_board {
 	unsigned long PhysIO;
 	void __iomem *RamIO;

drivers/char/toshiba.c

@@ -64,7 +64,6 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Jonathan Buzzard <[email protected]>");
 MODULE_DESCRIPTION("Toshiba laptop SMM driver");
-MODULE_SUPPORTED_DEVICE("toshiba");
 
 static DEFINE_MUTEX(tosh_mutex);
 static int tosh_fn;

drivers/input/joydev.c

@@ -26,7 +26,6 @@
 
 MODULE_AUTHOR("Vojtech Pavlik <[email protected]>");
 MODULE_DESCRIPTION("Joystick device interfaces");
-MODULE_SUPPORTED_DEVICE("input/js");
 MODULE_LICENSE("GPL");
 
 #define JOYDEV_MINOR_BASE	0

drivers/media/firewire/firedtv-fw.c

@@ -430,4 +430,3 @@ MODULE_AUTHOR("Andreas Monitzer <[email protected]>");
 MODULE_AUTHOR("Ben Backx <[email protected]>");
 MODULE_DESCRIPTION("FireDTV DVB Driver");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("FireDTV DVB");

drivers/media/pci/cx18/cx18-alsa-main.c

@@ -41,7 +41,6 @@ MODULE_PARM_DESC(debug,
 
 MODULE_AUTHOR("Andy Walls");
 MODULE_DESCRIPTION("CX23418 ALSA Interface");
-MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder");
 MODULE_LICENSE("GPL");
 
 MODULE_VERSION(CX18_VERSION);

drivers/media/pci/cx18/cx18-driver.c

@@ -232,7 +232,6 @@ MODULE_PARM_DESC(cx18_first_minor,
 
 MODULE_AUTHOR("Hans Verkuil");
 MODULE_DESCRIPTION("CX23418 driver");
-MODULE_SUPPORTED_DEVICE("CX23418 MPEG2 encoder");
 MODULE_LICENSE("GPL");
 
 MODULE_VERSION(CX18_VERSION);

drivers/media/pci/cx25821/cx25821-alsa.c

@@ -104,7 +104,6 @@ MODULE_PARM_DESC(index, "Index value for cx25821 capture interface(s).");
 MODULE_DESCRIPTION("ALSA driver module for cx25821 based capture cards");
 MODULE_AUTHOR("Hiep Huynh");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("{{Conexant,25821}");	/* "{{Conexant,23881}," */
 
 static unsigned int debug;
 module_param(debug, int, 0644);

drivers/media/pci/cx88/cx88-alsa.c

@@ -98,7 +98,6 @@ MODULE_AUTHOR("Mauro Carvalho Chehab <[email protected]>");
 MODULE_LICENSE("GPL v2");
 MODULE_VERSION(CX88_VERSION);
 
-MODULE_SUPPORTED_DEVICE("{{Conexant,23881},{{Conexant,23882},{{Conexant,23883}");
 static unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");

drivers/media/pci/ivtv/ivtv-alsa-main.c

@@ -38,7 +38,6 @@ MODULE_PARM_DESC(index,
 
 MODULE_AUTHOR("Andy Walls");
 MODULE_DESCRIPTION("CX23415/CX23416 ALSA Interface");
-MODULE_SUPPORTED_DEVICE("CX23415/CX23416 MPEG2 encoder");
 MODULE_LICENSE("GPL");
 
 MODULE_VERSION(IVTV_VERSION);

drivers/media/pci/ivtv/ivtv-driver.c

@@ -275,9 +275,6 @@ MODULE_PARM_DESC(ivtv_first_minor, "Set device node number assigned to first car
 
 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
 MODULE_DESCRIPTION("CX23415/CX23416 driver");
-MODULE_SUPPORTED_DEVICE
-    ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
-		"\t\t\tYuan MPG series and similar)");
 MODULE_LICENSE("GPL");
 
 MODULE_VERSION(IVTV_VERSION);

drivers/media/pci/sta2x11/sta2x11_vip.c

@@ -1269,6 +1269,5 @@ late_initcall_sync(sta2x11_vip_init_module);
 MODULE_DESCRIPTION("STA2X11 Video Input Port driver");
 MODULE_AUTHOR("Wind River");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("sta2x11 video input");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, sta2x11_vip_pci_tbl);

drivers/media/platform/atmel/atmel-isi.c

@@ -1363,4 +1363,3 @@ module_platform_driver(atmel_isi_driver);
 MODULE_AUTHOR("Josh Wu <[email protected]>");
 MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("video");

drivers/media/platform/atmel/atmel-sama5d2-isc.c

@@ -330,4 +330,3 @@ module_platform_driver(atmel_isc_driver);
 MODULE_AUTHOR("Songjun Wu");
 MODULE_DESCRIPTION("The V4L2 driver for Atmel-ISC");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("video");

drivers/media/platform/marvell-ccic/cafe-driver.c

@@ -44,10 +44,6 @@
 MODULE_AUTHOR("Jonathan Corbet <[email protected]>");
 MODULE_DESCRIPTION("Marvell 88ALP01 CMOS Camera Controller driver");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("Video");
-
-
-
 
 struct cafe_camera {
 	int registered;			/* Fully initialized? */

drivers/media/platform/stm32/stm32-dcmi.c

@@ -2149,4 +2149,3 @@ MODULE_AUTHOR("Yannick Fertre <[email protected]>");
 MODULE_AUTHOR("Hugues Fruchet <[email protected]>");
 MODULE_DESCRIPTION("STMicroelectronics STM32 Digital Camera Memory Interface driver");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("video");

drivers/media/usb/cpia2/cpia2_v4l.c

@@ -56,7 +56,6 @@ MODULE_PARM_DESC(flicker_mode, "Flicker frequency (0 (disabled), " __stringify(5
 
 MODULE_AUTHOR("Steve Miller (STMicroelectronics) <[email protected]>");
 MODULE_DESCRIPTION("V4L-driver for STMicroelectronics CPiA2 based cameras");
-MODULE_SUPPORTED_DEVICE("video");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(CPIA_VERSION);
 

drivers/media/usb/tm6000/tm6000-alsa.c

@@ -51,7 +51,6 @@ MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s).");
 MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},{{Trident,tm6000},{{Trident,tm6010}");
 static unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages");

drivers/media/usb/tm6000/tm6000-dvb.c

@@ -23,8 +23,6 @@ MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV ca
 MODULE_AUTHOR("Mauro Carvalho Chehab");
 MODULE_LICENSE("GPL");
 
-MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},{{Trident, tm6000},{{Trident, tm6010}");
-
 static int debug;
 
 module_param(debug, int, 0644);

drivers/mtd/maps/sun_uflash.c

@@ -32,7 +32,6 @@
 
 MODULE_AUTHOR("Eric Brower <[email protected]>");
 MODULE_DESCRIPTION("User-programmable flash device on Sun Microsystems boardsets");
-MODULE_SUPPORTED_DEVICE(DRIVER_NAME);
 MODULE_LICENSE("GPL");
 MODULE_VERSION("2.1");
 

drivers/net/can/peak_canfd/peak_pciefd_main.c

@@ -21,7 +21,6 @@
 
 MODULE_AUTHOR("Stephane Grosjean <[email protected]>");
 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCIe/M.2 FD family cards");
-MODULE_SUPPORTED_DEVICE("PEAK PCAN PCIe/M.2 FD CAN cards");
 MODULE_LICENSE("GPL v2");
 
 #define PCIEFD_DRV_NAME		"peak_pciefd"

drivers/net/can/sja1000/ems_pci.c

@@ -21,7 +21,6 @@
 
 MODULE_AUTHOR("Sebastian Haas <[email protected]>");
 MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-PCI/PCIe/104P CAN cards");
-MODULE_SUPPORTED_DEVICE("EMS CPC-PCI/PCIe/104P CAN card");
 MODULE_LICENSE("GPL v2");
 
 #define EMS_PCI_V1_MAX_CHAN 2

drivers/net/can/sja1000/ems_pcmcia.c

@@ -21,7 +21,6 @@
 
 MODULE_AUTHOR("Markus Plessing <[email protected]>");
 MODULE_DESCRIPTION("Socket-CAN driver for EMS CPC-CARD cards");
-MODULE_SUPPORTED_DEVICE("EMS CPC-CARD CAN card");
 MODULE_LICENSE("GPL v2");
 
 #define EMS_PCMCIA_MAX_CHAN 2

drivers/net/can/sja1000/kvaser_pci.c

@@ -33,7 +33,6 @@
 
 MODULE_AUTHOR("Per Dalen <[email protected]>");
 MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
-MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
 MODULE_LICENSE("GPL v2");
 
 #define MAX_NO_OF_CHANNELS        4 /* max no of channels on a single card */

drivers/net/can/sja1000/peak_pci.c

@@ -24,8 +24,6 @@
 
 MODULE_AUTHOR("Stephane Grosjean <[email protected]>");
 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI family cards");
-MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe/PCIeC miniPCI CAN cards");
-MODULE_SUPPORTED_DEVICE("PEAK PCAN miniPCIe/cPCI PC/104+ PCI/104e CAN Cards");
 MODULE_LICENSE("GPL v2");
 
 #define DRV_NAME  "peak_pci"

drivers/net/can/sja1000/peak_pcmcia.c

@@ -22,7 +22,6 @@
 MODULE_AUTHOR("Stephane Grosjean <[email protected]>");
 MODULE_DESCRIPTION("CAN driver for PEAK-System PCAN-PC Cards");
 MODULE_LICENSE("GPL v2");
-MODULE_SUPPORTED_DEVICE("PEAK PCAN-PC Card");
 
 /* PEAK-System PCMCIA driver name */
 #define PCC_NAME		"peak_pcmcia"

drivers/net/can/sja1000/plx_pci.c

@@ -25,18 +25,6 @@
 MODULE_AUTHOR("Pavel Cheblakov <[email protected]>");
 MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with "
 		   "the SJA1000 chips");
-MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
-			"Adlink PCI-7841/cPCI-7841 SE, "
-			"Marathon CAN-bus-PCI, "
-			"Marathon CAN-bus-PCIe, "
-			"TEWS TECHNOLOGIES TPMC810, "
-			"esd CAN-PCI/CPCI/PCI104/200, "
-			"esd CAN-PCI/PMC/266, "
-			"esd CAN-PCIe/2000, "
-			"Connect Tech Inc. CANpro/104-Plus Opto (CRG001), "
-			"IXXAT PC-I 04/PCI, "
-			"ELCUS CAN-200-PCI, "
-			"ASEM DUAL CAN-RAW")
 MODULE_LICENSE("GPL v2");
 
 #define PLX_PCI_MAX_CHAN 2

drivers/net/can/usb/peak_usb/pcan_usb.c

@@ -18,8 +18,6 @@
 
 #include "pcan_usb_core.h"
 
-MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter");
-
 /* PCAN-USB Endpoints */
 #define PCAN_USB_EP_CMDOUT		1
 #define PCAN_USB_EP_CMDIN		(PCAN_USB_EP_CMDOUT | USB_DIR_IN)

drivers/net/can/usb/peak_usb/pcan_usb_fd.c

@@ -16,9 +16,6 @@
 #include "pcan_usb_core.h"
 #include "pcan_usb_pro.h"
 
-MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB FD adapter");
-MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter");
-
 #define PCAN_USBPROFD_CHANNEL_COUNT	2
 #define PCAN_USBFD_CHANNEL_COUNT	1
 

drivers/net/can/usb/peak_usb/pcan_usb_pro.c

@@ -17,8 +17,6 @@
 #include "pcan_usb_core.h"
 #include "pcan_usb_pro.h"
 
-MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro adapter");
-
 #define PCAN_USBPRO_CHANNEL_COUNT	2
 
 /* PCAN-USB Pro adapter internal clock (MHz) */

drivers/net/hamradio/scc.c

@@ -2167,7 +2167,6 @@ static void __exit scc_cleanup_driver(void)
 
 MODULE_AUTHOR("Joerg Reuter <[email protected]>");
 MODULE_DESCRIPTION("AX.25 Device Driver for Z8530 based HDLC cards");
-MODULE_SUPPORTED_DEVICE("Z8530 based SCC cards for Amateur Radio");
 MODULE_LICENSE("GPL");
 module_init(scc_init_driver);
 module_exit(scc_cleanup_driver);

drivers/net/wireless/admtek/adm8211.c

@@ -28,7 +28,6 @@
 MODULE_AUTHOR("Michael Wu <[email protected]>");
 MODULE_AUTHOR("Jouni Malinen <[email protected]>");
 MODULE_DESCRIPTION("Driver for IEEE 802.11b wireless cards based on ADMtek ADM8211");
-MODULE_SUPPORTED_DEVICE("ADM8211");
 MODULE_LICENSE("GPL");
 
 static unsigned int tx_ring_size __read_mostly = 16;

drivers/net/wireless/ath/ath5k/base.c

@@ -90,7 +90,6 @@ MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state");
 MODULE_AUTHOR("Jiri Slaby");
 MODULE_AUTHOR("Nick Kossifidis");
 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
-MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 
 static int ath5k_init(struct ieee80211_hw *hw);

drivers/net/wireless/ath/ath9k/hw.c

@@ -34,7 +34,6 @@ static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type);
 
 MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
-MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 
 static void ath9k_hw_set_clockrate(struct ath_hw *ah)

drivers/net/wireless/ath/ath9k/init.c

@@ -37,7 +37,6 @@ static char *dev_info = "ath9k";
 
 MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
-MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 
 static unsigned int ath9k_debug = ATH_DBG_DEFAULT;

drivers/net/wireless/atmel/atmel.c

@@ -75,7 +75,6 @@
 MODULE_AUTHOR("Simon Kelley");
 MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("Atmel at76c50x wireless cards");
 
 /* The name of the firmware file to be loaded
    over-rides any automatic selection */

drivers/net/wireless/atmel/atmel_cs.c

@@ -57,7 +57,6 @@
 MODULE_AUTHOR("Simon Kelley");
 MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
 
 /*====================================================================*/
 

drivers/net/wireless/atmel/atmel_pci.c

@@ -16,7 +16,6 @@
 MODULE_AUTHOR("Simon Kelley");
 MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("Atmel at76c506 PCI wireless cards");
 
 static const struct pci_device_id card_ids[] = {
 	{ 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },

drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c

@@ -87,7 +87,6 @@ static int n_adapters_found;
 
 MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
-MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 /* This needs to be adjusted when brcms_firmwares changes */
 MODULE_FIRMWARE("brcm/bcm43xx-0.fw");

drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c

@@ -12,7 +12,6 @@
 
 MODULE_AUTHOR("Broadcom Corporation");
 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver utilities.");
-MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
 
 struct sk_buff *brcmu_pkt_buf_get_skb(uint len)

drivers/net/wireless/cisco/airo.c

@@ -251,7 +251,6 @@ MODULE_AUTHOR("Benjamin Reed");
 MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards.  "
 		   "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
 module_param_hw_array(io, int, ioport, NULL, 0);
 module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_array(rates, int, NULL, 0);

drivers/net/wireless/cisco/airo_cs.c

@@ -47,7 +47,6 @@ MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet "
 		   "cards.  This is the module that links the PCMCIA card "
 		   "with the airo module.");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
 
 /*====================================================================*/
 

drivers/net/wireless/intersil/hostap/hostap_cs.c

@@ -26,7 +26,6 @@ static char *dev_info = "hostap_cs";
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
 		   "cards (PC Card).");
-MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
 MODULE_LICENSE("GPL");
 
 

drivers/net/wireless/intersil/hostap/hostap_pci.c

@@ -27,7 +27,6 @@ static char *dev_info = "hostap_pci";
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Support for Intersil Prism2.5-based 802.11 wireless LAN "
 		   "PCI cards.");
-MODULE_SUPPORTED_DEVICE("Intersil Prism2.5-based WLAN PCI cards");
 MODULE_LICENSE("GPL");
 
 

drivers/net/wireless/intersil/hostap/hostap_plx.c

@@ -30,7 +30,6 @@ static char *dev_info = "hostap_plx";
 MODULE_AUTHOR("Jouni Malinen");
 MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
 		   "cards (PLX).");
-MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PLX)");
 MODULE_LICENSE("GPL");