USB Wifi TP-Link AC600 cannot work with newest version

[kienngd]

I use Ubuntu 24.04
Kernel: 6.8.0-31
Wifi: TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano] ID 2357:011e
I install by command sudo make dkms_install with newest version, wifi will disconnect after init. So I cannot list wifi list.
But if I reset code to commit 63cf0b4. Wifi works fine.

[lemichimc]

Same for me!
THANK YOU VERY MUCH
Greetings from Germany <3
But the problem is really existing so please fix it!

[cblknittights]

Same here, just got this device to replace an internal card that is not working with Kubuntu 24.04

Get a green blinking LED, no wireless networks listed in the network manager

I will gladly provide anything more:

I tried the repo rtl8812au via synpatic and refuses to build has all kinds of errors..... purged that out and did this ... and no joy...

Details:
uname:
Linux X 6.8.0-31-generic #31-Ubuntu SMP PREEMPT_DYNAMIC Sat Apr 20 00:40:06 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux

lsusb
Bus 007 Device 002: ID 2357:011e TP-Link AC600 wireless Realtek RTL8811AU [Archer T2U Nano]

iwconfig:

wlxf0a731dc05c0 unassociated ESSID:"" Nickname:"WIFI@REALTEK"
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

dmesg output below:

[ 1767.784649] usb 2-3: new high-speed USB device number 4 using ehci-pci
[ 1767.917670] usb 2-3: New USB device found, idVendor=2357, idProduct=011e, bcdDevice= 2.00
[ 1767.917682] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1767.917687] usb 2-3: Product: 802.11ac WLAN Adapter 
[ 1767.917691] usb 2-3: Manufacturer: Realtek 
[ 1767.917695] usb 2-3: SerialNumber: 00e04c000001
[ 1768.614733] ------------[ cut here ]------------
[ 1768.614742] WARNING: CPU: 1 PID: 9988 at /var/lib/dkms/8812au/5.6.4.2_35491.20191025/build/core/rtw_odm.c:62 rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.615073] Modules linked in: 88XXau(OE+) snd_seq_dummy snd_hrtimer xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables bridge stp llc qrtr binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec wl(POE) snd_hda_core uvcvideo snd_hwdep i915 videobuf2_vmalloc uvc videobuf2_memops snd_pcm videobuf2_v4l2 snd_seq_midi videodev snd_seq_midi_event snd_rawmidi videobuf2_common drm_buddy snd_seq ttm mc drm_display_helper snd_seq_device snd_timer dell_laptop cec dell_wmi cfg80211 dell_smbios snd rc_core dcdbas ledtrig_audio sparse_keymap dell_smm_hwmon dell_wmi_descriptor i2c_algo_bit wmi_bmof i2c_i801 coretemp i2c_smbus soundcore lpc_ich joydev input_leds mac_hid serio_raw msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 btrfs blake2b_generic xor raid6_pq libcrc32c dm_crypt dm_mirror
[ 1768.615248]  dm_region_hash dm_log sha256_ssse3 sha1_ssse3 r8169 ahci psmouse libahci realtek ssb video wmi ums_realtek uas usb_storage crypto_simd cryptd
[ 1768.615285] CPU: 1 PID: 9988 Comm: (udev-worker) Tainted: P           OE      6.8.0-31-generic #31-Ubuntu
[ 1768.615291] Hardware name: Dell Inc. Inspiron 1470/0M7CYJ, BIOS A03 10/19/2009
[ 1768.615295] RIP: 0010:rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.615624] Code: 85 d2 74 26 be 04 00 00 00 48 89 c7 e8 97 2c 09 00 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 8b 14 95 f0 4a c1 c1 85 d2 75 da <0f> 0b be 04 00 00 00 48 89 c7 e8 6f 2c 09 00 5d 31 c0 31 d2 31 f6
[ 1768.615631] RSP: 0018:ffffba49c5f078c0 EFLAGS: 00010246
[ 1768.615637] RAX: ffffba49c086ced0 RBX: ffffba49c005b000 RCX: 0000000000000000
[ 1768.615642] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffba49c005b000
[ 1768.615645] RBP: ffffba49c5f078c0 R08: 0000000000000000 R09: 0000000000000000
[ 1768.615649] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9b8886548000
[ 1768.615652] R13: ffff9b88a45c8c00 R14: 0000000000000000 R15: ffffffffc1ae0a40
[ 1768.615656] FS:  000070f68a27b8c0(0000) GS:ffff9b88bbf00000(0000) knlGS:0000000000000000
[ 1768.615661] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1768.615665] CR2: 0000784c00000020 CR3: 000000010b8ca000 CR4: 00000000000406f0
[ 1768.615670] Call Trace:
[ 1768.615675]  <TASK>
[ 1768.615681]  ? show_regs+0x6d/0x80
[ 1768.615692]  ? __warn+0x89/0x160
[ 1768.615701]  ? rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.615982]  ? report_bug+0x17e/0x1b0
[ 1768.615992]  ? handle_bug+0x51/0xa0
[ 1768.615998]  ? exc_invalid_op+0x18/0x80
[ 1768.616003]  ? asm_exc_invalid_op+0x1b/0x20
[ 1768.616011]  ? rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.616285]  rtw_hal_read_chip_version+0x21/0x30 [88XXau]
[ 1768.616594]  rtw_usb_primary_adapter_init+0x128/0xa50 [88XXau]
[ 1768.616880]  rtw_usb_primary_adapter_init+0x41c/0xa50 [88XXau]
[ 1768.617164]  ? pm_runtime_enable+0x51/0xd0
[ 1768.617171]  ? __pm_runtime_set_status+0x1b7/0x360
[ 1768.617179]  usb_probe_interface+0xee/0x300
[ 1768.617188]  really_probe+0x1c7/0x410
[ 1768.617195]  __driver_probe_device+0x8c/0x180
[ 1768.617201]  driver_probe_device+0x24/0xd0
[ 1768.617208]  __driver_attach+0x10b/0x210
[ 1768.617214]  ? __pfx___driver_attach+0x10/0x10
[ 1768.617220]  bus_for_each_dev+0x8d/0xf0
[ 1768.617229]  driver_attach+0x1e/0x30
[ 1768.617234]  bus_add_driver+0x156/0x260
[ 1768.617241]  driver_register+0x5e/0x130
[ 1768.617248]  usb_register_driver+0x83/0x170
[ 1768.617253]  ? __pfx_init_module+0x10/0x10 [88XXau]
[ 1768.617426]  init_module+0x55/0xff0 [88XXau]
[ 1768.617613]  do_one_initcall+0x5e/0x340
[ 1768.617625]  do_init_module+0xc0/0x2c0
[ 1768.617634]  load_module+0xba1/0xcf0
[ 1768.617643]  init_module_from_file+0x96/0x100
[ 1768.617648]  ? init_module_from_file+0x96/0x100
[ 1768.617657]  idempotent_init_module+0x11c/0x2b0
[ 1768.617664]  __x64_sys_finit_module+0x64/0xd0
[ 1768.617670]  x64_sys_call+0x1d6e/0x25c0
[ 1768.617676]  do_syscall_64+0x7f/0x180
[ 1768.617683]  ? __x64_sys_openat+0x55/0xa0
[ 1768.617690]  ? syscall_exit_to_user_mode+0x86/0x260
[ 1768.617699]  ? do_syscall_64+0x8c/0x180
[ 1768.617705]  ? do_syscall_64+0x8c/0x180
[ 1768.617711]  ? exc_page_fault+0x94/0x1b0
[ 1768.617719]  entry_SYSCALL_64_after_hwframe+0x73/0x7b
[ 1768.617728] RIP: 0033:0x70f68a12725d
[ 1768.617757] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48
[ 1768.617762] RSP: 002b:00007fffc76f5a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1768.617768] RAX: ffffffffffffffda RBX: 00005ed13cb0e340 RCX: 000070f68a12725d
[ 1768.617772] RDX: 0000000000000004 RSI: 000070f68a30407d RDI: 0000000000000012
[ 1768.617776] RBP: 00007fffc76f5ae0 R08: 0000000000000040 R09: 00007fffc76f5a70
[ 1768.617780] R10: 000070f68a203b20 R11: 0000000000000246 R12: 000070f68a30407d
[ 1768.617784] R13: 0000000000020000 R14: 00005ed13cbef970 R15: 00005ed13caed750
[ 1768.617791]  </TASK>
[ 1768.617794] ---[ end trace 0000000000000000 ]---
[ 1768.802945] usb 2-3: 88XXau f0:a7:31:dc:05:c0 hw_info[107]
[ 1768.805843] ------------[ cut here ]------------
[ 1768.805853] WARNING: CPU: 1 PID: 9988 at /var/lib/dkms/8812au/5.6.4.2_35491.20191025/build/core/rtw_odm.c:62 rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.806226] Modules linked in: 88XXau(OE+) snd_seq_dummy snd_hrtimer xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables bridge stp llc qrtr binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec wl(POE) snd_hda_core uvcvideo snd_hwdep i915 videobuf2_vmalloc uvc videobuf2_memops snd_pcm videobuf2_v4l2 snd_seq_midi videodev snd_seq_midi_event snd_rawmidi videobuf2_common drm_buddy snd_seq ttm mc drm_display_helper snd_seq_device snd_timer dell_laptop cec dell_wmi cfg80211 dell_smbios snd rc_core dcdbas ledtrig_audio sparse_keymap dell_smm_hwmon dell_wmi_descriptor i2c_algo_bit wmi_bmof i2c_i801 coretemp i2c_smbus soundcore lpc_ich joydev input_leds mac_hid serio_raw msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 btrfs blake2b_generic xor raid6_pq libcrc32c dm_crypt dm_mirror
[ 1768.806405]  dm_region_hash dm_log sha256_ssse3 sha1_ssse3 r8169 ahci psmouse libahci realtek ssb video wmi ums_realtek uas usb_storage crypto_simd cryptd
[ 1768.806443] CPU: 1 PID: 9988 Comm: (udev-worker) Tainted: P        W  OE      6.8.0-31-generic #31-Ubuntu
[ 1768.806450] Hardware name: Dell Inc. Inspiron 1470/0M7CYJ, BIOS A03 10/19/2009
[ 1768.806453] RIP: 0010:rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.806762] Code: 85 d2 74 26 be 04 00 00 00 48 89 c7 e8 97 2c 09 00 5d 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 8b 14 95 f0 4a c1 c1 85 d2 75 da <0f> 0b be 04 00 00 00 48 89 c7 e8 6f 2c 09 00 5d 31 c0 31 d2 31 f6
[ 1768.806768] RSP: 0000:ffffba49c5f07828 EFLAGS: 00010246
[ 1768.806774] RAX: ffffba49c086ced0 RBX: ffffba49c005b000 RCX: 0000000000000000
[ 1768.806778] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffba49c005b000
[ 1768.806782] RBP: ffffba49c5f07828 R08: 0000000000000000 R09: 0000000000000002
[ 1768.806786] R10: ffffba49c005e792 R11: 0000000000000000 R12: ffffba49c086ced0
[ 1768.806790] R13: ffffba49c0869000 R14: ffff9b8886548000 R15: ffffffffc1ae0a40
[ 1768.806793] FS:  000070f68a27b8c0(0000) GS:ffff9b88bbf00000(0000) knlGS:0000000000000000
[ 1768.806798] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1768.806802] CR2: 00007764778ffae0 CR3: 000000010b8ca000 CR4: 00000000000406f0
[ 1768.806807] Call Trace:
[ 1768.806812]  <TASK>
[ 1768.806818]  ? show_regs+0x6d/0x80
[ 1768.806828]  ? __warn+0x89/0x160
[ 1768.806838]  ? rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.807135]  ? report_bug+0x17e/0x1b0
[ 1768.807146]  ? handle_bug+0x51/0xa0
[ 1768.807151]  ? exc_invalid_op+0x18/0x80
[ 1768.807156]  ? asm_exc_invalid_op+0x1b/0x20
[ 1768.807165]  ? rtw_odm_init_ic_type+0x52/0x70 [88XXau]
[ 1768.807441]  Init_ODM_ComInfo+0x38/0x5a0 [88XXau]
[ 1768.807743]  rtl8812_init_dm_priv+0x44/0xb0 [88XXau]
[ 1768.808024]  rtw_hal_dm_init+0x22/0x50 [88XXau]
[ 1768.808313]  rtw_init_drv_sw+0x25d/0x290 [88XXau]
[ 1768.808615]  rtw_usb_primary_adapter_init+0x14c/0xa50 [88XXau]
[ 1768.808905]  rtw_usb_primary_adapter_init+0x41c/0xa50 [88XXau]
[ 1768.809189]  ? pm_runtime_enable+0x51/0xd0
[ 1768.809198]  ? __pm_runtime_set_status+0x1b7/0x360
[ 1768.809206]  usb_probe_interface+0xee/0x300
[ 1768.809215]  really_probe+0x1c7/0x410
[ 1768.809223]  __driver_probe_device+0x8c/0x180
[ 1768.809229]  driver_probe_device+0x24/0xd0
[ 1768.809235]  __driver_attach+0x10b/0x210
[ 1768.809242]  ? __pfx___driver_attach+0x10/0x10
[ 1768.809247]  bus_for_each_dev+0x8d/0xf0
[ 1768.809257]  driver_attach+0x1e/0x30
[ 1768.809262]  bus_add_driver+0x156/0x260
[ 1768.809268]  driver_register+0x5e/0x130
[ 1768.809276]  usb_register_driver+0x83/0x170
[ 1768.809281]  ? __pfx_init_module+0x10/0x10 [88XXau]
[ 1768.809456]  init_module+0x55/0xff0 [88XXau]
[ 1768.809641]  do_one_initcall+0x5e/0x340
[ 1768.809653]  do_init_module+0xc0/0x2c0
[ 1768.809663]  load_module+0xba1/0xcf0
[ 1768.809673]  init_module_from_file+0x96/0x100
[ 1768.809678]  ? init_module_from_file+0x96/0x100
[ 1768.809685]  idempotent_init_module+0x11c/0x2b0
[ 1768.809693]  __x64_sys_finit_module+0x64/0xd0
[ 1768.809699]  x64_sys_call+0x1d6e/0x25c0
[ 1768.809704]  do_syscall_64+0x7f/0x180
[ 1768.809712]  ? __x64_sys_openat+0x55/0xa0
[ 1768.809720]  ? syscall_exit_to_user_mode+0x86/0x260
[ 1768.809728]  ? do_syscall_64+0x8c/0x180
[ 1768.809735]  ? do_syscall_64+0x8c/0x180
[ 1768.809741]  ? exc_page_fault+0x94/0x1b0
[ 1768.809748]  entry_SYSCALL_64_after_hwframe+0x73/0x7b
[ 1768.809758] RIP: 0033:0x70f68a12725d
[ 1768.809789] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48
[ 1768.809794] RSP: 002b:00007fffc76f5a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 1768.809801] RAX: ffffffffffffffda RBX: 00005ed13cb0e340 RCX: 000070f68a12725d
[ 1768.809805] RDX: 0000000000000004 RSI: 000070f68a30407d RDI: 0000000000000012
[ 1768.809809] RBP: 00007fffc76f5ae0 R08: 0000000000000040 R09: 00007fffc76f5a70
[ 1768.809813] R10: 000070f68a203b20 R11: 0000000000000246 R12: 000070f68a30407d
[ 1768.809817] R13: 0000000000020000 R14: 00005ed13cbef970 R15: 00005ed13caed750
[ 1768.809824]  </TASK>
[ 1768.809827] ---[ end trace 0000000000000000 ]---
[ 1768.820722] usbcore: registered new interface driver rtl88XXau
[ 1768.930741] rtl88XXau 2-3:1.0 wlxf0a731dc05c0: renamed from wlan0
[ 1769.333690] [Warning] Supportability Init Warning !!!
[ 1769.336808] [phydm_cck_pd_init]warning
[ 1774.006920] warning: `Qt bearer threa' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 1785.758616] [phydm_cck_pd_th]warning
[ 1791.902567] [phydm_cck_pd_th]warning
[ 1791.903065] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1791.903075] #PF: supervisor instruction fetch in kernel mode
[ 1791.903080] #PF: error_code(0x0010) - not-present page
[ 1791.903085] PGD 0 P4D 0 
[ 1791.903094] Oops: 0010 [#1] PREEMPT SMP PTI
[ 1791.903102] CPU: 1 PID: 10013 Comm: RTW_CMD_THREAD Tainted: P        W  OE      6.8.0-31-generic #31-Ubuntu
[ 1791.903110] Hardware name: Dell Inc. Inspiron 1470/0M7CYJ, BIOS A03 10/19/2009
[ 1791.903115] RIP: 0010:0x0
[ 1791.903152] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 1791.903156] RSP: 0018:ffffba49c08ffbd8 EFLAGS: 00010283
[ 1791.903163] RAX: 0000000000000000 RBX: ffffba49c086ced0 RCX: ffffba49c08ffc08
[ 1791.903169] RDX: ffffba49c08ffc00 RSI: ffffba49c08ffbf8 RDI: ffffba49c086ced0
[ 1791.903174] RBP: ffffba49c08ffcc0 R08: ffffba49c08ffc10 R09: 0000000000000000
[ 1791.903179] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 1791.903183] R13: 000000000000001d R14: 000000000000001d R15: ffffba49c08ffc48
[ 1791.903189] FS:  0000000000000000(0000) GS:ffff9b88bbf00000(0000) knlGS:0000000000000000
[ 1791.903195] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1791.903200] CR2: ffffffffffffffd6 CR3: 000000009783c000 CR4: 00000000000406f0
[ 1791.903206] Call Trace:
[ 1791.903211]  <TASK>
[ 1791.903216]  ? show_regs+0x6d/0x80
[ 1791.903228]  ? __die+0x24/0x80
[ 1791.903234]  ? page_fault_oops+0x99/0x1b0
[ 1791.903243]  ? do_user_addr_fault+0x2ee/0x6b0
[ 1791.903251]  ? exc_page_fault+0x83/0x1b0
[ 1791.903261]  ? asm_exc_page_fault+0x27/0x30
[ 1791.903276]  odm_get_tracking_table+0xf4/0x580 [88XXau]
[ 1791.903520]  odm_txpowertracking_callback_thermal_meter+0x39f/0x730 [88XXau]
[ 1791.903743]  odm_txpowertracking_check+0x5d/0xe0 [88XXau]
[ 1791.903961]  phydm_rf_watchdog+0xe/0x20 [88XXau]
[ 1791.904041]  halrf_watchdog+0xe/0x20 [88XXau]
[ 1791.904041]  phydm_watchdog+0x8c/0xf0 [88XXau]
[ 1791.904041]  rtw_phydm_watchdog+0x1df/0x3c0 [88XXau]
[ 1791.904041]  rtl8812_HalDmWatchDog+0x56/0x70 [88XXau]
[ 1791.904041]  rtw_hal_dm_watchdog+0x21/0x30 [88XXau]
[ 1791.904041]  rtw_drvextra_cmd_hdl+0x98/0x3f0 [88XXau]
[ 1791.904041]  rtw_cmd_thread+0x344/0x530 [88XXau]
[ 1791.904041]  ? __pfx_rtw_drvextra_cmd_hdl+0x10/0x10 [88XXau]
[ 1791.904041]  ? __pfx_rtw_cmd_thread+0x10/0x10 [88XXau]
[ 1791.904041]  kthread+0xf2/0x120
[ 1791.904041]  ? __pfx_kthread+0x10/0x10
[ 1791.904041]  ret_from_fork+0x47/0x70
[ 1791.904041]  ? __pfx_kthread+0x10/0x10
[ 1791.904041]  ret_from_fork_asm+0x1b/0x30
[ 1791.904041]  </TASK>
[ 1791.904041] Modules linked in: 88XXau(OE) snd_seq_dummy snd_hrtimer xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables bridge stp llc qrtr binfmt_misc snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec wl(POE) snd_hda_core uvcvideo snd_hwdep i915 videobuf2_vmalloc uvc videobuf2_memops snd_pcm videobuf2_v4l2 snd_seq_midi videodev snd_seq_midi_event snd_rawmidi videobuf2_common drm_buddy snd_seq ttm mc drm_display_helper snd_seq_device snd_timer dell_laptop cec dell_wmi cfg80211 dell_smbios snd rc_core dcdbas ledtrig_audio sparse_keymap dell_smm_hwmon dell_wmi_descriptor i2c_algo_bit wmi_bmof i2c_i801 coretemp i2c_smbus soundcore lpc_ich joydev input_leds mac_hid serio_raw msr parport_pc ppdev lp parport efi_pstore nfnetlink dmi_sysfs ip_tables x_tables autofs4 btrfs blake2b_generic xor raid6_pq libcrc32c dm_crypt dm_mirror dm_region_hash
[ 1791.904041]  dm_log sha256_ssse3 sha1_ssse3 r8169 ahci psmouse libahci realtek ssb video wmi ums_realtek uas usb_storage crypto_simd cryptd
[ 1791.904041] CR2: 0000000000000000
[ 1791.904041] ---[ end trace 0000000000000000 ]---
[ 1791.904041] RIP: 0010:0x0
[ 1791.904041] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 1791.904041] RSP: 0018:ffffba49c08ffbd8 EFLAGS: 00010283
[ 1791.904041] RAX: 0000000000000000 RBX: ffffba49c086ced0 RCX: ffffba49c08ffc08
[ 1791.904041] RDX: ffffba49c08ffc00 RSI: ffffba49c08ffbf8 RDI: ffffba49c086ced0
[ 1791.904041] RBP: ffffba49c08ffcc0 R08: ffffba49c08ffc10 R09: 0000000000000000
[ 1791.904041] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 1791.904041] R13: 000000000000001d R14: 000000000000001d R15: ffffba49c08ffc48
[ 1791.904041] FS:  0000000000000000(0000) GS:ffff9b88bbf00000(0000) knlGS:0000000000000000
[ 1791.904041] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1791.904041] CR2: ffffffffffffffd6 CR3: 000000009783c000 CR4: 00000000000406f0
[ 1791.904041] note: RTW_CMD_THREAD[10013] exited with irqs disabled

[cblknittights]

But if I reset code to commit 63cf0b4. Wifi works fine.

How did you "reset" to this, I tried git reset 63cf0b4 and compiled, and no joy... still gives the same issues I posted.

[kienngd]

But if I reset code to commit 63cf0b4. Wifi works fine.

How did you "reset" to this, I tried git reset 63cf0b4 and compiled, and no joy... still gives the same issues I posted.

I use command git reset to reset code. Then git status to show changed files. I remove all new files and checkout all changed files. Finally, I use command sudo make dkms_install. It works fine for me.

[rajatkashyap47586]

Hi every1
I also facing the same issue but in my case the problem is I cloned this repo yesterday and get the same error. I cannot simply reset the repo as it contains only the latest clone.

Any solution on how get the working version ?

Thanks in advance.

[dubhater]

git checkout 63cf0b4 should do it.

[rajatkashyap47586]

git checkout 63cf0b4 should do it.

post this do I need to install rtl8812au from the repo again like sudo make dkms_install ?
Or only checkout is enough ?

[dubhater]

Oh, you're using dkms. Yes, you probably need to install again.

[rajatkashyap47586]

Oh, you're using dkms. Yes, you probably need to install again.

I tried to do installation again but I'm gettting error
cp -r * /usr/src/8812au-5.6.4.2_35491.20191025
dkms add -m 8812au -v 5.6.4.2_35491.20191025
Error! DKMS tree already contains: 8812au-5.6.4.2_35491.20191025
You cannot add the same module/version combo more than once.
make: *** [Makefile:1789: dkms_install] Error 3

It looks like it is trying to install the same version even though in repo the git head is on 63cf0b4

Please let me know if I'm doing something wrong here.

[dubhater]

Uninstall it then install again.

[rajatkashyap47586]

Uninstall it then install again.

I tried but getting same error

usbcore: registered new interface driver rtl88XXau
[ 58.325787] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 58.325793] #PF: supervisor read access in kernel mode
[ 58.325795] #PF: error_code(0x0000) - not-present page

[cblknittights]

But if I reset code to commit 63cf0b4. Wifi works fine.

How did you "reset" to this, I tried git reset 63cf0b4 and compiled, and no joy... still gives the same issues I posted.

I use command git reset to reset code. Then git status to show changed files. I remove all new files and checkout all changed files. Finally, I use command sudo make dkms_install. It works fine for me.

I am not a git guy.. so can you please detail the steps...

1. Pull git repo

git clone http......

2. reset to this commit

git reset 63cf0b4

3. ????????

4. ???????

5. ??????

6. sudo make dkms_install

As above, I am not git person, so more details are needed, please. Thank you.

[cblknittights]

Ok... based on some other replies this WORKS...

I tested in a LIVE USB setup and the device now works, I will wipe and reinstall... I think things were buggered up enough from playing with trying to get the internal card working to do this any way...

so for other NON git people like me:

git clone...... (from the readme)

git checkout 63cf0b4

sudo make dkms_install

Plug in/or replug device.. and I clicked on the network manager and it showed wireless networks!

Only glitch is the ONE 5Ghz network that I would prefer to use is not shown????? Weird....

But I an use the other AP for this...

BUT WORKS!

Whereas the internal broadcom one wont. $13 well spent.

Hope this post helps others... and the debug info gets the bug swatted.... out.

[rajatkashyap47586]

6. sudo make dkms_install

what I did :-

step1) Go to the cloned git repo -> cd rtl8812au
step2) Uninstall the package -> make dkms_remove
step3) Removed the entire package -> rm -rf rtl8812au
step4) Clone again the git repo -> git clone https://github.com/aircrack-ng/rtl8812au.git

step5) Go to the cloned git repo -> cd rtl8812au
step6) Checkout to the stable version -> git checkout 63cf0b4
step7) Install again -> make dkms_install
step8) reboot -> reboot
step9) tested again -> selecting wifi adaptor from usb in virtual box post this I can wifi in kali and then I tried to connect to any network then I can only see loading bar, if in meanwhile I used "dmesg" then I can see the error :-

[ 87.433972] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 87.433993] #PF: supervisor read access in kernel mode
[ 87.433997] #PF: error_code(0x0000) - not-present page

I'm not sure this error is corresponding to the wifi or not.

I have whole dmesg output if you want I can share that.

Also, I used the same wifi adaptor before updating the packages in my kali that time it was working perfectly.

[rajatkashyap47586]

Ok... based on some other replies this WORKS...

I tested in a LIVE USB setup and the device now works, I will wipe and reinstall... I think things were buggered up enough from playing with trying to get the internal card working to do this any way...

so for other NON git people like me:

git clone...... (from the readme)

git checkout 63cf0b4

sudo make dkms_install

Plug in/or replug device.. and I clicked on the network manager and it showed wireless networks!

Only glitch is the ONE 5Ghz network that I would prefer to use is not shown????? Weird....

But I an use the other AP for this...

BUT WORKS!

Whereas the internal broadcom one wont. $13 well spent.

Hope this post helps others... and the debug info gets the bug swatted.... out.

I tried the same but no luck yet. Waiting for some help on this...